Your First Lift Part 2 - Zero and connecting the unit

Zero, Connect, and Attaching your GymAware unit

To connect and zero your device to the iPad:

1. Ensure unit it facing upward and pull on the tether twice or press the yellow button (RS Unit only) to turn it on

2. The device should beep which indicates that it is on

3. Open the GymAware App on your iPad

4. Go to the bottom left hand corner and click on this icon

5. Your available devices should show up here

6. Click on the green "connect & 0" button

NOTE: You only have to do this once each time you turn the unit on

______________________________________

Attaching your unit to the bar

To attach your GymAware unit to the barbell

1. Pull the tether until you reach you device

2. Attach the magnetic strap on the inside of the collar for most compound exercises 

3. Fasten the velcro strap loosely around the bar