Battery Warnings

Never charge a PowerTool with a different charger as this may result in damaging the circuit board.

Issue:

PowerTool emits two long beeps and switches off when tether pulled.

Meaning:

The PowerTool battery needs recharging.

Plug in the provided charger and ensure the “charge” LED turns on to indicate charging is occurring.

Issue:

The red LED starts flashing when the tether is not being pulled.

Meaning:

The Battery is starting to go flat.

Put the PowerTool on charge as soon as you can and leave it on charge overnight.

Issue:

The PowerTool continuously beeps and the red LED flashes when the tether is not being pulled.

Meaning:

The PowerTool battery is nearly flat and will power off very shortly.

Put the PowerTool on charge immediately after the current set has been completed.

The “charge” LED will be orange when the unit is charging. 

When it is fully charged, the LED will turn green until the charger is removed then the green light will disappear.