Turning ON the RS
Press ON/OFF (yellow) button once to turn GymAware on. You will hear one beep, a pause and a slow beeping will commence. You will see the connection LED brighten and pulse with the slow beeping. This indicates that the unit is ready to be connected to the iPad. Then:
1. Ensure that the GymAware is face up and on the ground or a flat surface, not just in your hand.
2. Ensure the tether is fully retracted.
3. Open the App
4. The GymAware connection window in the bottom left of the screen will pop up and prompt you to Zero the device.
5. Tap Zero
6. The GymAware will beep twice and the LED on the front cover will start to flash white.
You are now connected and ready to collect data.
During a set
During a set, the blue indicator LED located on the top of the unit will flash repeatedly indicating the lifts are being recorded.
Turning off the RS (sleep)
Hold the ON/OFF (yellow) button down for 2 seconds and the connection LED will begin to flash and a slow double beep sound will. Let go of the button. The unit is now asleep and can be woken up by pulling the tether or pressing the ON/OFF button
Turning off the RS (shut down)
Shut down only needs to be performed if the GymAware unit is being stored for an extended period of time.
Hold the ON/OFF (yellow) button down for 2 seconds and the connection LED will begin to flash and a slow double beep sound will. Continue to hold the button down until the unit is silenced (another 2 seconds). The unit is now fully powered down and can be turned on only by pressing the yellow ON/OFF button
Read this article to learn how to Zero GymAware correctly.
Read this article to learn how to Switch GymAware units
Comments
0 comments
Please sign in to leave a comment.