Connect your Data Plate

Connect Your Data Plate

Now that you have your account set up, lets connect your ANCORE Data Plate to the FLEX Stronger app.

Step 1: Start the Connection Process

1. Open the FLEX Stronger app

2. Tap the FLEX icon in the top left corner

3. Tap the "Connect" button

Step 2: Find and Pair Your Device

1. Press the power button on your Data Plate until a white light begins flashing. Your device will appear in the list of available devices

2. Look for the serial number that matches the number on your Data Plate (you'll find this on the front of the device)

3. Tap on the ANC#### (Data Plate) with the matching serial number to select it

Connected devices shows you which devices are connected. Multiple devices can be connected at once; however only 1 device remains 'active' depending on your exercise

You'll know it's connected when:

• The light on the Data Plate stops blinking and your app is presented with the device info and actions.

Step 3: Set Your Preferences (Optional)

• Turn on Auto Connect: Slide the blue switch to "ON" - this will automatically connect your Data Plate every time you open the app

• Give it a nickname: Enter a custom name in the name field if you want (helpful if you have multiple Data Plates)

Step 4: Finish Setup

Tap "Done" to complete the connection.

You're All Set! The icon in the top left will now show your Data Plate's battery level and serial number. You're ready to start training!

On the image left, the top left icon shows that total 2 devices are connected and the ANCORE Data Plate connection is active.