Soft Reset

There may be an occasion when the PowerTool isn’t working correctly. It may get locked up or connected to another iPad.

There are two types of Reset/Disconnect that you can perform. If you want to disconnect the PowerTool or don’t know which device it is paired to then use the “Hard Reset” - watch the video below.

Soft Reset

Try the Hard Reset if the device becomes unresponsive with the LEDs on, OR you have accidently auto-connected to the wrong iOS device and want a quick disconnect. 

How: Position the magnets in the middle of the silicon tube (at the base of the Velcro Strap) directly on the path of the curve of the GymAware logo.  You will hear the PowerTool disconnect beep. Watch the video  On older versions of the PowerTool this will be directly under the “G”